Select Page

Hazardous Location and Explosion Proof

2000XL Series

Hazardous Location Non-Metallic LED Warning Light

Tomar Electronics model 2000XL series is a compact Hazardous Location LED warning light engineered to perform in the harshest environments. Constructed of 30% glass-filled thermoset polyester it is particularly well-suited for installations in corrosive, wet NEMA 4X harsh environments, and hazardous locations. This high strength FRP material is resistant to the corrosive effects of most chemicals, hydrocarbons and solvents.

Typical applications include manufacturing plants, chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, agricultural, commercial, industrial, mining and marine facilities.

Totally non-metallic these warning lights are fully sealed for NEMA 4X capability in any mounting configuration – base up, down or side positions. Their compact design makes them ideally suited where space consideration may be an issue.

Unique mounts allow for Pendant, Flange (Ceiling), or Wall mount installations. Buy just the mounting style you need, or install directly onto approved panel surface. Optional dome guard is also available.

Available in either Flashing or Steady-burn mode, this model will operate over a wide AC and DC input voltage range. The DC version operates from 10-100 VDC, and the AC version from 85 – 265 VAC.

Features
  • Class I, Division 2 Groups A, B, C, & D
  • Class I, Zone 2, Groups IIC, IIB, IIA
  • Class II Division 2 Groups F & G; Class III
  • CSA Enclosure Type 4X, IP66
  • NEMA 4X, Marine Rated
  • 5-year warranty
  • Sealed construction
  • 5 LED Colors – Amber, Blue, Green, Red, and White
  • Top blackout cap
to the following standards:
  • UL 1598 Standard for luminaires
  • UL 1598A Marine luminaires
  • UL 844 Standard for lighting fixtures forhazardous locations
  • UL 1638 Standard for visual signaling applications
  • CSA C22.2 no. 137-M1981 electric luminaires for use in hazardous locations
  • Enclosed and gasketed, NEMA 3, 4X, IP66
2000XL Models
Model Description Voltage
2024XLF Flashing LED – body only 12-80 VDC
2124XLF Flashing LED – body only 120 – 240 VAC
2024XLS Steady-Burn LED – body only 12-80 VDC
2124XLS Steady-Burn LED – body only 120 – 240 VAC

Note: Mounts and Compact Dome Guards are sold separately (see Below).

Please specify LED color, and if blackout cap is required. Available LED colors are Amber, Blue, Red, Green and White.

Available Mounts & Guard Options

Item Description
NVP Pendant mount
NVF Flange / Ceiling mount
NVW Wall mount
NVGM Compact dome guard
Specifications
Item Description
Lamp Type LED
Flash Rate 75 NEOBE flashes per minute – each flash containing 7 rapid bursts of light (approximately 560 ms “on-time” and 240 ms “off-time”
Voltage and Amperage 200 mA @ 24 VDC Flashing / 420 mA Steady-burn
040 mA @ 120 VAC Flashing / 085 mA Steady-burn
020 mA @ 240 VAC Flashing / 045 mA Steady-burn
Temperature Code T6
Temperature Rating –40º C to +65º C
Architect and Engineer Specifications

Visual signaling beacon shall be Tomar Electronics model number 2024XLF, 2124XLF, 2024XLS, or 2124XLF or approved equal. The beacon shall be cCSA/us Listed Class I, Division 2, Class I, Zone 2, Class II, Division 2, and Class III for use in specified hazardous locations and / or combustible atmospheres as classified by the National Electric Code. The warning beacon shall be of non-metallic glass-filled thermoset polyester construction. The light source shall be a single high-power LED. DC voltage range shall be from 10-100 VDC, and AC voltage range from 85 – 265 VAC. The warning signal shall be NEMA 4X rated in any mounting configuration – base up, down, or side positions.