Hazardous Location and Explosion Proof
Hazardous Location Non-Metallic Strobe Warning Light
Tomar Electronics model 4000X series is a Hazardous Location Strobe warning light engineered to perform in the harshest environments. Constructed of 30% glass-filled thermoset polyester it is particularly well-suited for installations in corrosive, wet NEMA 4X harsh environments, and hazardous locations. This high strength FRP material is resistant to the corrosive effects of most chemicals, hydrocarbons and solvents.
Typical applications include manufacturing plants, chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, agricultural, commercial, industrial, mining and marine facilities.
Totally non-metallic, these warning lights are fully potted in urethane material with no exposure to high voltage possible. NEMA 4X rated in any mounting configuration – base up, down or side positions.
Unique mounts allow for Pendant, Flange (Ceiling), or Wall mount installations. Buy just the mounting style you need. Optional dome guard is also available.
- Class I, Division 2 Groups A, B, C, & D
- Class I, Zone 2, Groups IIC, IIB, IIA
- Class II Division 2 Groups F & G; Class III
- CSA Enclosure Type 4X, IP66
- NEMA 4X, Marine Rated
- 10-year warranty on power supply
- 10,000 hour strobe tube
- Sealed construction
- 6 Lens Colors – Amber, Blue, Clear, Green, Purple, and Red
to the following standards:
- UL 1598 Standard for luminaires
- UL 1598A Marine luminaires
- UL 844 Standard for lighting fixtures forhazardous locations
- UL 1638 Standard for visual signaling applications
- CSA C22.2 no. 137-M1981 electric luminaires for use in hazardous locations
- Enclosed and gasketed, NEMA 3, 4X, IP66
|4024X||Xenon Strobe – body only||12-80 VDC|
|4120X||Xenon Strobe – body only||120 VAC|
|4040X||Xenon Strobe – body only||240 VAC|
Note: Mounts and Dome Guards are sold separately (see Below).
Available Mounts & Guard Options
|NVF||Flange / Ceiling mount|
|Lamp Type||5001 Xenon Strobe tube|
|Flash Rate||80 flashes per minute|
|Voltage and Amperage||400 mA @ 12 VDC / 200 mA @ 24 VDC
040 mA @ 120 VAC / 020 mA @ 240 VAC
|Temperature Rating||–40º C to +65º C|
Architect and Engineer Specifications
Visual signaling beacon shall be Tomar Electronics model number 2024XLF, 2124XLF, 2024XLS, or 2124XLF or approved equal. The beacon shall be cCSA/us Listed Class I, Division 2, Class I, Zone 2, Class II, Division 2, and Class III for use in specified hazardous locations and / or combustible atmospheres as classified by the National Electric Code. The warning beacon shall be of non-metallic glass-filled thermoset polyester construction. The light source shall be a single high-power LED. DC voltage range shall be from 10-100 VDC, or 16-36 VAC and AC voltage range from 85 – 265 VAC. The warning signal shall be NEMA 4X rated in any mounting configuration – base up, down, or side positions.