801 Mini I Beacon
Low-profile Single Flash Strobe
The model 801 family is a low profile, single flash strobe light featuring universal mounting, low profile 360° Lexan® lens, high efficiency regulated solid state power supply, and heavy duty xenon strobe lamp. All units are polarity protected and have built-in filters to protect against radio interference and spike voltages. The model 801 features a fully potted, Lexan®, multi-purpose mounting base which is vibration and water resistant. The 801 also features a field replaceable plug-in strobe lamp and a state of the art energy storage capacitor for increased intensity.
- Universal mounting
- Built-in RFI filters
- Solid state power supply
- Xenon strobe lamp
- Available in amber, blue, clear, green, purple, and red
- 5 year warranty on power supply
- 1 year warranty on lamp
- UL listed (where noted below)
- NEMA 4X
|801–110||AC strobe with 10” leads, UL listed||120VAC, 50/60Hz|
|801LC–110||AC strobe with AC cord set, UL listed||120VAC, 50/60Hz|
|801LCMB–110||AC strobe, magnetic mount and cord||120VAC, 50/60Hz|
|801–240||AC strobe with 10” leads, UL listed||240VAC, 50/60Hz|
|801–1274||DC strobe with 10” leads, 800–FLG||12 – 74VDC|
|801MB–1274||DC strobe, magnetic mount and 10’ coil cord||12 – 74VDC|
|801MBSC–1274||DC strobe, magnetic mount and 10’ straight cord||12 – 74VDC|
|Flash Rate||80 to 95 flashes per minute|
|Light Output||400 effective candlepower (ECP)*|
|Voltage and Amperage||12-74VDC draws 1.25A @ 12V tapering to 0.2A average @ 74V
120VAC draws 0.3A average
240VAC draws 0.3A average
|Power Supply Output 11 Watts||8 joules per flash. 800,000 peak candlepower**|
|Operating Temperature||-40 C to 65 C|
|Size and Weight||5.25” tall x 5.5” dia. x 2.0 lbs ( 133mm x 140mm x 0.9kg )|
|Pipe Mount||Use 1/2-14 NPSL Straight Pipe Thread|
Architect and Engineer Specifications
The visual signaling beacon shall be Tomar model 801 or approved equal. The light source shall be a plug-in field replaceable single-flash xenon strobe lamp. The warning beacon shall have a Lexan® lens and universal mount base. The warning signal must have built-in RFI filters to protect against radio interference and spike voltages. It shall be polarity protected, and have a power supply fully potted in polyurethane. The beacon shall have an 11 watt power supply, and generate 8 joules per flash at 80 to 95 flashes per minute. Light intensity is to be 400 effective candlepower, and voltage ranges shall be 12-74VDC, 120 VAC, and 240VAC. Strobe light shall be designed to accept a dome guard and mounting bracket.
*ECP (Effective Candlepower) is the intensity that would appear to an observer if the light were burning steadily.
**Peak Candlepower is the maximum light intensity generated by a flashing light during its light pulse.