Single Flash Strobe
Available Colors and Mounts
The MICROSTROBE® family is a low profile, single flash, low cost strobe light which features a plug-in replaceable lamp and Lexan® lens. The high efficiency, solid state, power supply is fully potted in polyurethane for the ultimate in protection from moisture, vibration and exposure to high voltage. All units are polarity protected and have built-in filters to protect against radio interference and spike voltages.
- Built-in RFI filters
- Lens has hermetic O-ring seal
- Solid state power supply
- Available in amber, blue, clear, green, purple, and red
- 2 year warranty on power supply
- 1 year warranty on lamp
- UL listed (all models)
- NEMA 4X
|470SSGP–120||AC strobe, wall plate mount||120VAC, 50/60Hz|
|480S–120||AC strobe, surface mount, AC cord set||120VAC, 50/60Hz|
|480SMB–120||AC strobe, magnetic mount||120VAC, 50/60Hz|
|485S-120||AC strobe, screw-in light bulb base||120VAC, 50/60Hz|
|485S-240||AC strobe, screw-in light bulb base||240VAC, 50/60Hz|
|490S–120||AC strobe, 1/2” female pipe mount||120VAC, 50/60Hz|
|490S–240||AC strobe, 1/2” female pipe mount||240VAC, 50/60Hz|
|492S–120||AC strobe, 3/4” IPS slip mount||120VAC, 50/60Hz|
|495S–120||AC strobe, 1/2” male thread mount||120VAC, 50/60Hz|
|495S–240||AC strobe, 1/2” male thread mount||240VAC, 50/60Hz|
|Flash Rate||60 to 80 flashes per minute|
|Light Output||50 effective candlepower (ECP)*|
|Voltage and Amperage||120VAC and 240VAC draw 0.07A average|
|Power Supply Output 2.7 Watts||2.3 joules per flash. 230,000 peak candlepower**|
|Operating Temperature||-40 C to 65 C|
|Size and Weight||5” tall x 3” dia. x 0.5 lbs ( 127mm x 76mm x 0.23kg )|
|440-Stand||Plastic Stand (Thread mount Microstrobe models only)|
|MAM-DS30||Wall mount bracket|
Architect and Engineer Specifications
The strobe light shall be Tomar model number series 470, 480, 485, 490,492, 495 or approved equal. The light source shall be a plug-in field replaceable single-flash xenon strobe tube. The strobe light must have built-in RFI filters to protect against radio interference and spike voltages. It shall be polarity protected, and have a power supply fully potted in polyurethane. Voltage ranges shall be 12-80VDC or 16-24VAC, 120 VAC, and 240VAC. The strobe light shall be UL listed and of NEMA 4X type weatherproof design with screw-on Lexan® lens.
*ECP (Effective Candlepower) is the intensity that would appear to an observer if the light were burning steadily.
**Peak Candlepower is the maximum light intensity generated by a flashing light during its light pulse.